ERMI and HERTSMI-2: What Dust Testing Can and Cannot Tell You in California
ERMI and HERTSMI-2 are the dust tests most CIRS-literate physicians reference. This guide explains what they measure, how to collect a sample that means something, how to read the scores, and the honest limitations nobody selling you a kit will mention.
What California changes about the picture
Ranges from foggy marine coast to hot interior valleys and mountain snow zones. Enormous stock of pre-1980 homes with original plumbing, minimal wall insulation, and slab-on-grade construction; coastal fog-belt homes see chronic surface condensation while inland homes fail at roofs and plumbing.
Protocols are national; moisture is local. In California, the pressure a building lives under comes from specific, predictable directions — and this protocol should be read with those directions in mind, because they decide where the risk concentrates, which assemblies fail first, and what a defensible local scope looks like.
The CA moisture drivers to read this against
- Coastal marine layer and fog-belt humidity
- Winter atmospheric-river rain events
- Slab moisture and legacy plumbing in older stock
What never changes — anywhere
California changes where the risk concentrates — never the order of operations. Moisture gets located, testing characterizes the exposure, the water gets fixed before the mold, remediation runs under verified containment, and an independent third party confirms the result.
The full protocol below covers the national playbook in depth — read it alongside the CA context above.
Read the full protocol: ERMI and HERTSMI-2: What Dust Testing Can and Cannot Tell You →
- What these tests actually measure
- Why dust beats a single air sample
- Collection determines whether the result means anything
- Reading the numbers without panic
- The honest limitations
- When to retest
California questions
Does this protocol change in California?
The sequence never changes — locate moisture, test honestly, fix water before mold, remediate under containment, verify independently. What changes in California is where the moisture pressure comes from: coastal marine layer and fog-belt humidity That determines where instruments go first and which assemblies earn suspicion.
What should California households check first?
Start with the failure modes this housing stock is known for. Enormous stock of pre-1980 homes with original plumbing, minimal wall insulation, and slab-on-grade construction; coastal fog-belt homes see chronic surface condensation while inland homes fail at roofs and plumbing. A moisture-focused assessment that ignores those patterns is guessing.
Can I get matched with a vetted provider in California?
Yes — matching runs in all 50 states, and California is one of our densest priority markets. Every provider is vetted on containment discipline, fine-particle competence, and willingness to be independently verified. Matching is free for households.
THIS PROTOCOL IN OTHER PRIORITY MARKETS → Colorado · Florida · Nevada · Texas
NEXT IN THE CA LIBRARY → The Mold Inspection, Done Right: A Homeowner's Field Manual in California